Firestick Remote Not Working – You are on the right page if your Firestick remote doesn’t work or pairs.
A few nights ago, I was watching one of my favourite movies on my FireStick. About halfway through the movie, I decided to drink from the refrigerator and take a quick break.
When I tried to pause the film with the FireStick remote not working, it did nothing. Despite my repeated attempts, the movie just kept playing when I pressed the buttons.
After pulling out the power plug, I rebooted, hoping the problem would be solved.
Despite a restart, FireStick remote not working could not be controlled. I had to wait a few more minutes for my suspicion to sink in that the remote was malfunctioning.
Read on! If your Amazon Firestick remote is not working, you will want to get it repaired. Here is what I have discovered about the causes and the solutions.
No Remote Control for Fire Stick
The following are common reasons why Fire Stick, FireTV Stick Lite, and Fire TV Cube remote issues arise. I am sure your remote will work again once you go through them one by one.
Check the Remote Batteries on your Fire Stick
One of Amazon’s power-hungry accessories is the Fire Stick Remote. My experience with the battery draining issues more than a few times with the FireStick remote not working has taught me that the batteries are probably dead if the remote doesn’t work.
There is no warning when the battery runs out. I would bet on the battery if your FireStick remote is not working suddenly (annoyingly, in the middle of the night when you don’t even have spare batteries).
Unfortunately, I have not yet been able to figure out why the remote consumes so many batteries. In a few weeks, the battery can run out.
Alexa technology, voice recognition, and voice commands are used on the FireStick remote not working. It is possible that some would blame Alexa for the problem.
There’s no way the remote listens to everything all the time. Alexa will not start listening until the button on the remote is pressed.
Regardless of the reasons, the only reasonable solution is to keep spares of good quality, alkaline batteries on hand.
Batteries made of alkaline are the best for the FireStick remote not working, and they last a long time. Be careful with alkaline, though. A reputable manufacturer should sell you the branded product.
A week ago, I might have even recommended the rechargeable alkaline battery if my own had not malfunctioned.
White residue was deposited on the connector after a battery leak in the remote. Despite my best efforts, I had to scrape off the white material on my brand-new battery to make it work.
I’m not convinced about rechargeable batteries, so please excuse me. Moreover, removing the batteries and inspecting the connectors for any remnants of the battery leaks would be an excellent idea.
You might be able to get your Firestick remote not working started working again by cleaning them.
Also, I almost forgot to tell you one more thing. As you might already know, batteries have positive (plus) and negative (minus) ends.
Battery compartment connectors have a + and aside, too. (And the minuses will automatically align). Align the plus side of the battery with the plus side of the connector. As a result, I had trouble controlling the remote after putting the batteries in the wrong way.
Keep reading for more solutions if your Amazon Fire Stick remote still doesn’t work after cleaning the battery connectors and using new batteries!
Have You Already Paired your FireStick Remote?
Remotes for FireStick devices are usually pre-paired when they are shipped out of the box. You will need to pair the device if it isn’t already paired. You may need to pair the new FireStick remote not working.
The pairing process is easy. Below is a step-by-step guide.
- Your TV must have an HDMI port for the FireStick.
- Ensure that your TV and FireStick are both on.
- Hold the ‘Home’ button on the remote for at least 10 seconds when FireStick boots up.
- Upon pairing, the FireStick remote must work.
Try pressing and holding the home button again for 10-20 seconds if it does not pair. Users had to repeat the process several times to achieve a successful pairing in many cases.
Bluetooth devices, including remote controllers, can be connected to FireStick. At least one device must be disconnected if you have already connected seven. To accomplish that, follow these steps:
- Go to the home screen of the FireStick and select Settings. In the top menu bar, you can access Settings.
- Next, open Controllers & Bluetooth Devices.
- The list of connected devices will appear. Following the on-screen instructions is all you need to do to unpair the device.
Also, remember to try again if you can’t pair the remote with your FireStick device the first time.
In most cases, it connects on the first try, but it may take up to three attempts in rare instances. You must then attempt solution #3 for resetting and repairing the remote if the issue persists. Several users have reported success with it.
Not Working Buttons on FireStick
In most cases, the firestick remote not working when you have not adequatelyhaveThere is a decent range of in-house and third-party remote controls that pair it with your FireStick.
It may take up to 10 seconds for the new pairing to take effect.
You can try resetting your remote and re-pairing it with FireStick if it still doesn’t work:
- Unplug the FireStick from the power source (or unplug the adapter from the outlet).
Hold the following buttons down for at least 20 seconds (all of them together):
– Back button
– Menu button
– Part of the navigation ring on the left
- Take the batteries out of the remote control for FireStick
- When the FireStick screen appears on your television, could you turn it on?
- Your FireStick remote should now have fresh batteries
- Let’s wait for one or two minutes
- You must have already paired your FireStick remote. Hold the Home button for a minimum of 10 seconds if it hasn’t paired.
How Compatible Is Your Fire Stick Remote?
If you have problems with the remote that came with your television, don’t ask this question. The separate remotes are what I’m referring to.
There is a decent range of in-house and third-party remote controls with FireStick remote not working and Fire TV devices.
You can use Amazon FireStick not working remotely with a third-party game controller or Amazon FireSticks as Amazon FireSticks.
It will work with any Amazon product with a clear compatibility statement. Make sure the remote or game controller you choose is compatible with the Fire TV or FireStick remote not working device if you consider buying one.
There are also some cheap replicas of the remote with the same layout and design. They can quickly be passed off as originals, but in the end, they will not work.
If you plan to buy an Amazon FireStick remote not working, you should first verify the seller’s authenticity.
Do You Have a Damaged FireStick Remote
Once you have installed the new batteries, tried all other possible solutions, and still have the original product, it is probably time to consider that it may be defective.
That means you can only purchase a replacement remote if that’s the case. I’m happy to report that the replacement remotes are not too expensive.
These can be bought for approximately $10. Visit Amazon to find out more about it. There are many options available to you.
Additional Netflix and other app buttons may also be found on a customized remote. Additionally, some remotes have volume controls.
Your Backup App For Amazon Fire TV
Are you not working on the Amazon Fire TV remote? Alternatively, your batteries ran out at midnight, and there are no spares.
FireStick remote not working does not need to be rendered useless because of this. With the Amazon Fire TV Remote App, you can still control the device.
Using this app, you can use FireStick if the firestick remote not working, just like a physical remote, and interact with it.
Apps for Android and iOS are available for Amazon Fire TV Remote. The app is available for download and can be set up on a FireStick remote not working or Fire TV. The device must be connected to the same wireless network as your smartphone.
Whenever I have had trouble with the FireStick remote not working, it has always been battery-related. Remotes drain batteries faster than I would like to.
Therefore, I keep spares at all times. In addition, I have downloaded Amazon Fire TV Remote on my phone.
I have tried to cover all the possible causes of remote issues in this article and all possible solutions. In the comment section below, I would genuinely appreciate it if you shared any new or different experiences.
FAQ: Frequently Asked Questions
These are some of the frequently asked questions related to the Firestick remote not working with complete information.
How do I fix an unresponsive fire stick remote?
Remove your gadget from the outlet and try again using the remote. Reset the remote after turning off the television. Ensure that there are no obstacles between the remote and the television. Replace your batteries and double-check that they’re put properly (positive side up)
How do I unfreeze my FireStick remote?
After it has frozen, hold down the centre and play buttons at the same time. Time. For a period of 10 to 15 seconds. Simply press and hold both of the buttons for 10 to 15 seconds.
Why isn’t my Amazon Fire Stick working?
Remove the Fire TV device from the HDMI port and reconnect it. Replace your HDMI cable or HDMI hub (not supplied) with a new one to see if it helps. For 4K Ultra HD streaming, you’ll need a High-Speed HDMI cable (not included). Match the source or input button on your remote to the HDMI port on your Fire TV.
How do I restart my Firestick remote?
In order to restart your Firestick Remote you can easily follow these steps.1. Turn on your TV and wait for the Fire Stick home screen to appear on the screen.2.Press and hold the “Home” button on your remote for a few seconds.3.Scroll down and click “My Fire TV,” then scroll down and choose “Restart” to restart your device in “Settings.”