How To Make a Homemade Cell Phone Signal Booster? If you are looking for the building mechanism of a homemade DIY signal booster, then you have come to the right place for seeking into. In this article, we are going to discuss the procedure for making a homemade signal booster.
Things Required To Make Signal Booster For Home
You will require the below-mentioned things:
- A piece of iron wire (35-40 cm)
- 2 connector blocks
- Small bolts and nuts
- Coaxial cable (10 m)
- A piece of a water pipe
- A plastic container
How To Make a Homemade Cell Phone Signal Booster
Follow the given below step by step instructions to make homemade signal booster for free and without hassle.
Step 1:
At first, to make the antenna, you have to straighten wires with pliers and then you have to bent it accurately in the center at accurate 90 degrees. Then measure 9 cm on both sides of the center. After that bent wire inwards at 90 degrees. Next, you have to focus on the edges of the wire. Those must also be bent inwards at 90 degrees. The distance from the last bend needs to be 8 cm.
Step 2:
After that install the connector block on the edges of the wire and secure it with the help of a screwdriver. Then cut one side of the pipe by half. Next, you have to make a hole in the center on the other side. Focus, that the hole should be of such size that the bolt could go through easily.
Step 3:
Then you have to insert the bolt into the hole. Next, just fix the antenna on top and secure it with the help of a small nut. Now you have to connect that coaxial cable. For that, strip the end of the cable and make a separation of the inner and outer wires. After that, you have to connect the inner wire to one side of the small block.
Step 4:
The outer wire to the other. Now please place the self-made GSM antenna on your TV antenna. The direction must be the same. Now pull the cable into the house. After that, you have to strip the other end of the coaxial cable. After dividing the wires inside it, you have to trim the external wires because that would not be needed anymore.
Step 5:
After that take a piece of plastic and cut that out to any shape. Next, you have to make a small hole on one side and then you have to pull the inner wire of coaxial cable through it carefully.
Step 6:
If you want, then you can strengthen this construction with tape. After finishing that, now you can put the modem on the piece of plastic and attach that plastic to the back of the phone. You are done. You can find your signal has been increased. It needs a sufficient amount of free time and the required materials to do this DIY booster.
Additional Tip:
If you want the signal to be boosted to a greater extent, then you must buy a professional GSM booster from the market to serve your purpose without any issue. We hope that this technique will help you to make a DIY GSM booster at home. So give your reviews about this How To Make a Homemade Cell Phone Signal Booster short and handy guide.